TXZDQ 型自動切水器

更新:2016/1/27 23:09:39      
  • 產品價格   0元
  • 產品型號   
  • 產品描述

    ...

產品介紹   訂購

一、設計原理:Design Principles:
自動切水器是利用不同介質的不同比重,來控制浮體在某一介質的界面位置的變化,并通過杠
桿的作用,實現開啟和關閉切水閥進行自動切水。
Au
tomatic cut water trap is the use of different media in different proportions, to control the
floating-body in a medium changes the location of the interface and, through leverage, to achieve open and
close valves automatically cut the water cut。
二、工作過程:Work process
首先將容器閥門打開,沉積的水或含有少量的殘油流入切水器,浮體浮起,水被排出。如流入
切水器的全是油時,水被壓出,浮力減小,切水閥自動關閉。流入切水器的是油水混合體時,水流
出,油回流。無介質流入切水器時,切水器常閉。
First, the container valve open, deposited a small amount of residual water or cut into the water traps
floating float, water is discharged. Cut into the device, such as water, all oil, water is pressed out, buoyancy
decreases, cut valve automatically closes. Cut into the water traps are oil-water mixture, the water flows out,

out back. No media into the water when you cut, cut water traps often closed.

安裝說明:Installation:

1、產品應安裝在被切介質的下方。
Product should be installed below the medium being cut
2、安裝后先向閥內注入一定的水使浮體懸浮。
After the first injection valve installation of a certain body of water so that floating suspension
3、定期排放出沉淀物,以確保閥的正常工作。
Regularly discharging sediment to ensure that the valve work
4、定期檢查切水機構及浮體機構。
Periodic inspection of water bodies and cut bodies floating body
五、訂貨需知:Order Know

更多產品
十一运夺金技巧